您现在看到的是我们协鑫的碳链组件。
全球首家基于区块链技术的光伏产业“碳链管理平台”，实现光伏组件“一物一码”，通过扫描组件边框上的二维码，即可直观的读取产品碳足迹报告、原料来源、生产工厂、产品特征ESG报告等丰富信息。
每块协鑫碳链组件的信息数据通过区块链技术的动态追溯下逐一落块并披露，真正实现产品信息可追、可查、可信且不可篡改。
● HJT组件
具有转换效率高、工艺温度低、稳定性高等优点。
● GPC组件（新一代BC电池）
可实现更高的转化效率并进一步降低成本。
● 莲花组件
全屏免清洁，产品采用托举式边框设计，全屏无阻挡，无边角污泥堆积，发电增益优势显著。在相同的安装环境、相同组件版型、相同系统配置等场景下，发电增益最高达14%，可降低7%左右的系统度电成本，已通过IEC认证、TUV莱茵认证，Swiss Re再保险服务。
● 全黑组件
组件采用TOPCON电池，更低的光致衰减（LID）特性；更优的温度系数性能，更优的组件性能；更高的组件效率，有效降低系统成本；美观的视觉效果，适用于屋顶项目，采用轻质高耐候性复合边框满足分布式发电屋顶要求。
● PVT光伏组件
这是一款380w的光热组件，PVT组件一共7层，正面发电，背面集热，采用蜂窝状流道设计，将光伏、光热、热泵三者结合，一套系统完美解决电、热两种根本需求，实现高效节能，能耗可降低50％以上，集供电、供热、供暖、制冷于一体。
What you see now are our carbon chain components of GCL.
The world's first blockchain technology-based carbon chain management platform for the PV industry realises It enables each PV module to have a unique code.. By scanning the QR code on the module frame, you can Directly read the product carbon footprint report, raw material sources, production factories, product characteristics, ESG reports and other information.
The information and data for each GCL Carbon Chain Module are dynamically traced and disclosed using blockchain technology, ensuring that product information is traceable, verifiable, reliable, and unmodifiable.
● HJT Module
It has the advantages of high conversion efficiency, low process temperature and high stability.
● GPC module (New generation BC battery)
Higher conversion efficiency and further cost reduction can be achieved.
● Lotus Module
The entire scree of this product is no need for cleaning, the product adopts the lift frame design, the full screen no blocking, no sludge accumulation at the corners, significantly enhancing power generation. In identical installation environments, with the same module type and system configuration, the power generation gain can reach up to 14%, reducing the cost of energy by approximately 7%. It has been certified by IEC, TÜV Rheinland, and Swiss Re insurance services.
● All black Module
The module utilizes TOPcon cells, which offer lower Light-Induced Degradation.; Better temperature coefficient performance, better component performance; Higher component efficiency, effectively reduce system costs; Beautiful visual effect, suitable for roof projects, the use of lightweight high weather resistance composite frame to meet the requirements of distributed generation roof.
● PVT photovoltaic module
This is a 380Watt PVT (Photovoltaic Thermal) module. The PVT module consists of a total of 7 layers, with the front side used for generating electricity and the back side used for collecting heat. The entire module features a honeycomb-shaped flow channel design, integrating photovoltaic, thermal, and heat pump technologies into a single system. This system provides a perfect solution for both electricity and heat needs, achieving highly efficient energy savings of more than 50%.